Filter
Top Products
• Place the selector switch ᕣ into the position
Ni-MH if you want to charge Ni-MH batteries.
• Place the selector switch
ᕣ into the position
Ni-Cd if you want to charge Ni-Cd batteries.
• Insert the batteries into the charging slots
ᕤ .
Note:
This appliance is equipped with an individual
shaft monitor, which allows it to charge 1 to 4
batteries of differing sizes (AA or AAA), capa-
city or charge condition. Ni-MH and Ni-Cd
batteries must not be loaded simultaneously.
Ensure that the batteries are inserted into the
charging slots in accordance with their polarities.
Otherwise, the batteries will not be charged.
• The charging process now begins. The Rapid
Battery Charger has a control lamp
· for each
cell in the charging slots
ᕤ. The control lamps ·
show the charging condition of the individual
batteries.
- 18 -
IB_TLG1750A1_46506_GB 24.02.2010 11:21 Uhr Seite 18