Filter
Top Products
17
Section 7: Features and Benefits
5/21/07
RB4596, RB45108 & RB5596 Rear Blade 301-133M
Land Pride
Table of Contents
RB55 Series Rear Blades
Features Benefits
Working widths 108”, 120”
Tractor HP Range 90-180 HP
Cat. 2 and 3 Bushing provided to go from Cat. 2 to Cat. 3 enables a wider variety of tractors to be used.
7 Forward and 7 reverse
positions
Various positions to work in various conditions to get desired results.
Tilt left or right Tilt moldboard left or right for ditching.
Offset left or right Position the moldboard beyond the tractor tire and enable to work closer to obstructions.
19” Moldboard height Tall moldboard allows for a great deal of material to be moved.
4” Solid Kingpin 4” Solid steel is matched for workloads up to 180 HP.
Heavy-duty pivot housing 1” Thick steel gives pivot housing strength, which is very important when pulling blade in
tilt, offset or angled positions.
5/16” Moldboard with
reinforcement
Heavy-duty moldboard to handle loads from 180 HP tractors.
Formed moldboard lip Top lip of moldboard is formed at 90 degrees for additional strength.
Reversible cutting edge Lengthens blade life by being able to use both edges.
Fully welded reinforced main
frame
Overall mainframe strength is enhanced due to being fully welded.
Retractable parking stand Enables one person hook-up and keeps the mainframe off of the ground.
Grease points in front pivot
shaft
Helps front pivot shaft to easily move.
Skid shoes (optional) Skid shoes protect the moldboard from hitting low lying obstructions like manhole covers.
Side plates (optional) Side plates allow the blade to hold material in to drag from one spot to another.
Hydraulic adjustments Hydraulic adjustments can be made from the tractor seat for on the go changes.
Warranty One year parts & labor.