Leica 806648 Laser Level User Manual


 
Leica DISTO
TM
D810 touch 799093a
39
ENSafety Instructions
The person responsible for the instrument
must ensure that all users understand these
directions and adhere to them.
Areas of responsibility
Responsibilities of the manufacturer
of the original equipment:
Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Internet: www.disto.com
The company above is responsible for
supplying the product, including the User
Manual in a completely safe condition.
The company above is not responsible for
third party accessories.
Responsibilities of the person in
charge of the instrument:
To understand the safety instructions on
the product and the instructions in the
User Manual.
To be familiar with local safety regulations
relating to accident prevention.
Always prevent access to the product by
unauthorised personnel.
Measuring distances
Tilt measurement
Data transfer with Bluetooth
®
Prohibited use
Using the product without instruction
Using outside the stated limits
Deactivation of safety systems and
removal of explanatory and hazard labels
Opening of the equipment by using tools
(screwdrivers, etc.)
Carrying out modification or conversion of
the product
Use of accessories from other manufac-
turers without express approval
Deliberate dazzling of third parties; also in
the dark
Inadequate safeguards at the surveying site
(e.g. when measuring on roads, construc-
tion sites, etc.)
Deliberate or irresponsible behaviour on
scaffolding, when using ladders, when
measuring near machines which are
running or near parts of machines or instal-
lations which are unprotected
Aiming directly in the sun
ƽWARNING
Watch out for erroneous measurements if
the instrument is defective or if it has been
dropped or has been misused or modified.
Carry out periodic test measurements.
Particularly after the instrument has been
subject to abnormal use, and before, during
and after important measurements.
ƽCAUTION
Never attempt to repair the product your-
self. In case of damage, contact a local dealer.
ƽWARNING
Changes or modifications not expressly
approved could void the user’s authority to
operate the equipment.
Limits of use
Refer to section "Technical data".
The device is designed for use in areas
permanently habitable by humans. Do not
use the product in explosion hazardous areas
or in aggressive environments.
i