Lenmar Enterprises BCR06 Battery Charger User Manual


 
NoMEM Batteries
NoMEM batteries cannot be discharged and MUST be stored fully charged. If you discharge a NoMEM battery it will
diminish its capacity and/or not fully charge up again. For this reason, NEVER use the Discharge / Charge feature when
charging NoMEM batteries. For NoMEM batteries, use the Charge Only feature. To keep your NoMEM batteries fresh and
to prolong their life, they should be fully recharged as soon after each use as possible. They should also receive a fresh
charge after every 4-6 months of storage or non-use.
Using Your BCR06 In...
CHARGE ONLY MODE (for NoMEM batteries)
Plug the appropriate power adapter into the base module, insert the battery to be charged. The red CHARGE indicator
should light. When the Red light goes out, your battery is fully charged.
NOTE: Never press the DISCHArge button while a NoMEM battery is inserted in the base module!
DISCHARGE / CHARGE MODE (for Ni-Cad type batteries)
Plug the appropriate adapter into the base module, and insert the battery to be charged. The RED CHARGE indicator
should light. Press the DISCHARGE button at the top of the base module until the green DISCHARGE light goes on. The
green light will stay on until the battery is fully discharged, then the red indicator will light showing that the battery is now
being charged. When the red light goes out, your battery is fully charged.
DISCHARGE ONLY MODE (for Ni-Cad type Batteries)
Insert your 6 Volt camcorder battery into the base module and press the DISCHARGE button on the top of the base
module until the green DISCHARGE indicator light goes on. The green light will turn off when the battery is fully
discharged.
SPECIFICATIONS:
POWER SOURCE
AC Adapter - Output 13.5 VDC - 1A
12 Volt DC Cigarette Adapter - Not to exceed 15 VDC
CHARGING CIRCUIT
Microprocessor Controlled Switching Type
CHARGING MODE
Current 850mA Constant
Time 1 to 2 Hours (Varies With Battery Capacity
and Charge Condition)
Detection -DV & 0DV
Protection Max. Voltage, Time, and Temperature
DISCHARGING MODE
Current 360mA +/- 20mA
Cut Off 1V / Cell
“LIMITED” 3 YEAR WARRANTY
This limited warranty starts from the date of original purchase and expires 3 years thereafter. If, during this period, any
part, because of manufacturing defects or workmanship fails to function properly under normal use will be repaired at no
charge for parts and labor or, at our option, the product will be replaced. The following is excluded: damages from delay
or loss of use of equipment, or damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs,
modifications, or accident.
Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it
prepaid and insured to:
LENMAR ENTERPRISES INC. USA , 4035 Via Pescador
Camarillo, CA 93012
When sending in product for service, your package should include evidence of date and place of purchase. Enclose
$10.00 for shipping and handling for addresses in the U.S. For outside the U.S. and Canada, freight will vary depending
upon ship to address.
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel
Environmental Justice Foundation against multiple electronics and appliance manufacturers.
WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to
cause birth defects or other reproductive harm. Wash hands after handling.