Filter
Top Products
NOTE:
Never press the DISCHArge button while a NoMEM battery is
inserted in the base module!
DISCHARGE / CHARGE MODE (for Ni-Cad type batteries)
Plug the appropriate power adapter into the base module hole marked
"DC IN", and insert the battery to be charged. The RED CHARGE
indicator should light. Press the DISCHARGE button at the top of the
base module until the GREEN DISCHARGE light goes on. The GREEN
light will stay on until the battery is fully discharged, then the RED
indicator light will light indicating that the battery is now being charged.
When the RED light goes out, your battery is fully charged.
DISCHARGE FOR STORAGE (for Ni-Cad type Batteries)
Plug the appropriate power adapter into the base module hole marked
"DC IN". Next, insert your 6 Volt camcorder battery into the base
module and press the DISCHARGE button on the top of the base
module until the GREEN DISCHARGE indicator light goes on. The
GREEN light will go out once the battery is fully discharged. The battery
should be removed soon after the GREEN light goes out to prevent the
battery from recharging automatically.
Using Your BCR261 As An Ac Power Source For Your Camcorder
Connect the adapter plate provided to your camcorder in place of the
battery. Plug either the AC Transformer or the DC adapter into the "DC
IN" jack on the base module. Finally, plug one end of the double ended
cable into the adapter plate on the camcorder, and the other end into
the hole on the base module marked "output". You should now have
power to your camcorder. If you do not have power, check the adapter
plate on the camcorder for proper connection and that the
interconnecting cable is fully inserted.
SPECIFICATIONS:
POWER SOURCE
• AC Adapter - Output 13.5 VDC - 1A
• 12 Volt DC Cigarette Adapter - Not to exceed 15 VDC
CHARGING CIRCUIT
• Microprocessor Controlled Switching Type
CHARGING MODE
• Current 850mA Constant
• Time 1 to 2 Hours (Varies With Battery Capacity
and Charge Condition)
• Detection -DV & 0DV
• Protection Max. Voltage, Time, and Temperature
DISCHARGING MODE
• Current 360mA +/- 20mA
• Cut Off 1V / Cell
POWER SUPPLY MODE OUTPUT
• Output 10.8 Watts
• Voltage DC 7.15V Regulated
• Current 1500mA Max.
“LIMITED” 1 YEAR WARRANTY
This limited warranty starts from the date of original
purchase and expires 1 year thereafter. If, during
this period, any part, because of manufacturing
defects or workmanship fails to function properly
under normal use will be repaired at no charge for
parts and labor or, at our option, the product will be
replaced. The following is excluded: damages from
delay or loss of use of equipment, or damaged
batteries, malfunctions resulting from misuse,
tampering, unauthorized repairs, modifications, or
accident.
Package the unit and its accessories carefully using
ample padding material to prevent damage in transit
and ship it prepaid and insured to:
LENMAR ENTERPRISES INC. USA , 31328 VIA
COLINAS #102, WESTLAKE VILLAGE, CA 91362.
When sending in product for service, your package
should include evidence of date and place of
purchase. Enclose $10.00 for shipping and
handling for addresses in the U.S. and $15.00 in
Canada. For outside the U.S. and Canada, freight
will vary depending upon ship to address.