Lenmar Enterprises Mach 1 Battery Charger User Manual


 
Trouble Shooting Tips:
Batteries should be replaced when run time becomes short.
If the LED status indicator does not light up when the charger unit is properly plugged into a power source, and a discharged battery is correctly
installed, make sure that the AC socket or cigarette lighter has power and that the battery cell is not defective.
Use a clean dry cloth when necessary to keep the metal contacts of both charger and battery clean.
Cautions:
For use with AA and AAA size NiMH batteries ONLY! Use with other type batteries voids warranty, may cause damage to the charger/ battery
and possibly cause injury to the user.
Do not leave any battery cell connected to the charger for prolonged periods. Remove the battery promptly after charge is complete.
Unplug the charger when not in use.
Do not use, place or store the charger where it may come into contact with water or moisture.
Always replace frayed or damaged wire and broken plugs immediately.
Use this charger with the power adapters included in the package only.
No user serviceable parts, opening chassis will void warranty.
Charger needs proper ventilation. Make sure charger vents are not being blocked and there is no problem with circulation
Do not use if charger fan is not operating.
Charge only NiMH batteries on this charger.
Batteries are not charged as shipped. Must be charged prior to first use.
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice
Foundation against multiple electronics and appliance manufacturers
WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or other
reproductive harm. Wash hands after handling.
Batteries may leak or explode causing personal injury if inserted improperly, disposed of in fire, mixed with other battery types,
or short circuited.
Use only NoMEM PRO or other proper NiMH compatible charger to recharge NoMEM PRO batteries.
Specifications:
AC Adapter: 100 – 240VAC, 50 / 60Hz
Power Input: 11-16 VDC @ 2A
Charge Method: Neotherm Charging Technology
Charge Rate: Variable, Continuously Adjusted via
Microprocessor
Limited 3 Year Warranty
This limited warranty starts from the date of original purchase and expires three years thereafter. If, during this period, any part,
because of manufacturing defects or workmanship fails to function properly under normal use will be repaired at no charge for parts
and labor or, at our option, the product will be replaced. The following is excluded: damages from delay or loss of use of equipment,
or damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs, modifications, or accident.
Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and
insured to:
LENMAR ENTERPRISES, INC.
4035 Via Pescador
Camarillo, CA 93012
When sending in product for service, your package should include evidence of date and place of purchase. Enclose $7.50 for shipping
and handling for addresses in the Continental U.S. For outside the U.S., freight will vary depending upon ship to address. See
lenmar.com for details.
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at:
www.Lenmar.com
or call us at 805/384-9600