Filter
Top Products
Mobiflex
™
200-M
www.lincolnelectric.com
[3]
RECOMMENDED OPTIONS
GENERAL OPTIONS
LFA 3.1 (10 ft.) and LFA 4.1
(13 ft.) Extraction Arm
Extraction arms with 360° rotat-
able hood, airflow throttle valve,
extraction focus spoiler, and han-
dle for every positioning. Hood
lamp and automatic start/stop
models available.
Order:
K2633-1 LFA 3.1
K2633-2
K2633-3 LFA 4.1
K2633-4
Hose and Hood Set
Completely flexible extraction
hose with magnetic hood set.
Ideal for those hard to access
fume extraction applications.
Comes with 152 mm (6") diameter
hose and reinforced outside steel
rings to protect against wear and
crushing.
Order K1668-1
Lamp Kit with Arc Sensor
To conserve energy and extend
the life of your system, order the
lamp kit with arc sensor. It senses
an arc while the lamp illuminates
the work area. The arc sensor
turns on the unit when it senses
an arc flash and automatically
turns off 20 seconds after the arc
goes out. Also includes a manual
override on/off switch that works
independently of the arc sensor.
Kit includes work lamp with arc
sensor housing, switch bank,
and wiring.
Order K1706-2
Starter Overload Switch
for 230V
This overload switch retrofits the
extraction unit for 230V operation.
Order K1494-3
LongLife
®
200-M Filter
Standard replacement LongLife
®
filter with ExtraCoat
®
treatment
that provides a 99.8% filter effi-
ciency.
Order K1673-1
Activated Carbon Filter
Mounts over LongLife
®
200-M
Filter and is recommended to
neutralize welding fume odors.
Order K1852-1
Consult your local Lincoln Representative to help you decide which options are right for you!
LFA 4.1 with lamp/arc sensor
LFA 3.1 with lamp/arc sensor