Filter
Top Products
Classic
®
300D
www.lincolnelectric.com
[7]
RECOMMENDED OPTIONS
W
IRE FEEDER OPTIONS
Wire Feed Module
Provides constant voltage (CV)
output with excellent arc stability
for Innershield welding and MIG
welding. Easy installation.
Recommended wire feeders are the
LN-25 and the LN-23P.
Order K623-1
Remote Control Kit
(Stick & Wire)
For Classic & Pipeliner machines
that have the wire feed module.
Contains a rheostat for stick
output, a potentiometer for wire
output and 100 ft. (30.5m) of
control cable.
Order K2464-1
LN-25 PRO Wire Feeder
Portable CC/CV unit for flux-cored
and MIG welding with MAXTRAC
®
wire drive system. Includes Gas
Solenoid & Internal Contactor.
Requires Wire Feed Module.
Order K2613-1
Magnum
®
350 Innershield
®
Gun
(for LN-25 PRO)
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062"-3/32"
(1.6-2.8 mm) wire.
Order K126-2
Drive Roll and Guide Tube Kit
(for LN-25 PRO,)
For cored or solid steel wire.
Order KP1697-068
for .068"-.072" (1.8 mm)
KP1697-5/64
for 5/64" (2.0 mm)
Magnum
®
300 MIG Gun
For .035"-.045" (0.9-1.2 mm)
gas-shielded wire with 15 ft.
(4.5m) cable.
LN-25 PRO
Order K1802-1
(includes Connector Kit)
Drive Roll and Guide Tube Kit
(for LN-25 PRO)
For .035" and .045" (0.9-1.1 mm)
solid steel wire.
Order KP1696-1
W
IRE FEEDER CONT.
LN-23P Wire Feeder
Portable CV unit for Innershield
pipe welding. Includes drive rolls
and guide tubes. Requires K2393-1
or -2 Input Cable Assembly and
Magnum
®
Innershield
®
Gun.
Order K316L-2
Input Cable Assembly
for LN-23P
8-socket to 14-pin control cable
with lugged electrode cable for
K316L-2 LN-23P Wire Feeder.
Order K2393-1 25 ft. (7.6 m)
K2393-1 75 ft. (22.9 m)
Magnum
®
350 Innershield
®
Gun
(for LN-23P)
Rated 350 amps, 60% duty cycle.
For .068"-5/64" (1.7-2.0 mm)
Innershield
®
wire and includes
reduced speed switch. Order
K345-10
Magnum
®
SG Spool Gun
Hand held semiautomatic wire
feeder. Requires SG Control
Module.
Order K487-25
SG Control Module
The interface between the power
source and the spool gun. Provides
control of the wire speed and gas
flow. For use with a spool gun.
Order K488
Input Cable
(For SG Control Module)
For Lincoln engine power sources
with 14-pin MS-type connection,
separate 115V NEMA receptacles
and output stud connections.
Order K691-10