Filter
Top Products
Split guides support the wire through the entire
drive system to minimize feeding problems.
Wide idler arm
hinge provides
improved drive
roll clamping
pressure.
Removable outer
wire guide for
easy access.
Input bushing
protects the wire
from damage.
Reliable brass-to-brass gun receiver bushings provide
connectivity to Magnum or competitive guns. Easier
interchangeability, better mechanical support and
electrical current transfer.
Easy turn
numeric tension
indicator with opti-
mized ranges for
different
wire types.
Internal tachometer feedback drive system
allows you to maintain constant wire feed
speed for consistent welds.
Separate drive
gear reduces
pressure on
motor shaft for
long life.
Two gear driven
rolls. No tools
needed to swap
rolls on or off.
Professional Heavy Duty Wire Drive System
Power MIG
®
350MP
www.lincolnelectric.com
[4]
A CLOSER LOOK
(1) Included with K2403-1 Push model and K2451-2 Push-Pull One-Pak
®
model.
(2) Included in the K2153-1 Aluminum Feeding Kit.
(3) Included with K2451-2 Push-Pull One-Pak
®
model.
DRIVE ROLL KITS
Wire Size Order Number
.023"-.030" (0.6-0.8 mm) KP1696-030S
Solid .035" (0.9 mm) KP1696-035S
.035/.045 Combination KP1696-1
(1)
.040" (1.0 mm) KP1696-2
.045" (1.2 mm) KP1696-045S
Cored
.035" (0.9 mm) KP1697-035C
.045" (1.2 mm) KP1697-045C
Aluminum
.035" (0.9 mm) KP1695-035A
3/64" (1.2 mm) KP1695-3/64A
(2)(3)
FEATURES
Easy Load Gas Cylinder Platform
Lockable Storage Compartment
w
ith Tool Tray
115 Volt AC Auxiliary Power
E
xtra Length 15 ft. (4.5 m) gun
Accessible Wire Compartment
A
dditional Gas Solenoid – connect
2
-piece TIG torch or control gas flow
to a spool gun.
Compare These Innovations – Make the Professional’s Choice
SM
!
Handy MIG gun expendables chart
Built-in gun holder
c
onveniently stores
welding gun.