Filter
Top Products
Precision TIG
®
375
www.lincolnelectric.com
[7]
RECOMMENDED OPTIONS
TIG OPTIONS
Magnum
®
Pro-Torch™
TIG Torches
A full line of air-cooled and water-
cooled torches available.
Request publication E12.150
PTA-26 One-Cable Adapter
Adapts the 7/8” PTA-26 fitting to the
5/8” gas and power connection on
machine.
Order K2166-1
PTA-9, -17 One-Cable Adapter
Adapts the 3/8" PTA-9 or -17 fitting
to the 5/8" gas and power
connection on machine.
Order K2166-3
PTA-9, PTA-17, PTA-26 Two-Cable
Adapter
Converts the 7/8" water and power
connection on the machine to a 1/2"
output stud for use with a two-cable
air-cooled TIG torch.
Order K2166-2
Foot Amptrol
®
Varies current for making critical TIG
welds. Depress pedal to increase
current. Depressing pedal fully
achieves maximum set current. Fully
raising the pedal finishes the weld
and starts the afterflow cycle.
Includes 25 ft. (7.6 m) control cable.
6-pin plug connection.
Order K870
Hand Amptrol
®
Provides 25 ft. (7.6m) of remote
current control for TIG welding (6 pin
plug connection). Velcro straps
secure torch.
Order K963-3 (One size fits all Pro-
Torch TIG Torches.)
Arc Start Switch
Needed if an Amptrol is not used
when TIG welding. Comes with a 25
ft. (7.6 m) cable. Attaches to the TIG
torch for convenient finger control.
6-pin plug connection.
Order K814
GENERAL OPTIONS
Under-Cooler Cart Water Cooler
Includes “cooler-in-a-drawer” with
hoses and a lockable storage drawer
on a dual bottle undercarriage. Two
gallon (7.5 ltrs.) capacity.
Order K1828-1
Undercarriage
Includes a dual bottle rack with chain
and front casters, rear wheels and a
handle.
Order K1869-1
Harris
®
Argon Flowmeter Regulator
Deluxe flowmeter/regulator. Includes
10 ft. (3.0 m) hose.
Order 3100211
Work Clamp & Cable Assembly
15 ft. 2/0 cable with 1/2” stud lug
and work clamp.
Order K2150-1
STICK OPTIONS
Accessory Kit
For stick welding. Includes 35 ft.
(10.7 m) 2/0 electrode cable with lug,
30 ft. (9.1 m) 2/0 work cable with
lugs, headshield, filter plate, work
clamp and electrode holder. 400 amp
capacity.
Order K704
Accessory Kit
For stick welding. Includes 20 ft.
(6.1 m) #6 electrode cable with lug,
15 ft. (4.6 m) #6 work cable with lugs,
headshield, filter plate, work clamp,
electrode holder and sample pack of
mild steel electrode. 150 amp
capacity.
Order K875
Remote Output Control
Consists of a control box with choice
of two cable lengths. Permits remote
adjustment of output. 6 pin
connection.
Order K857 for 25 ft. (7.6 m)
Order K857-1 for 100 ft. (30.5 m)