Filter
Top Products
Idealarc DC-600
www.lincolnelectric.com
[3]
RECOMMENDED OPTIONS
GENERAL OPTIONS
Multi-Process Switch
3-position switch allows quick and
easy change from electrode positive
or negative semiautomatic/wire feed
welding to stick or air carbon
arc gouging.
Order K804-1
Undercarriage
Platform undercarriage with
mountings for two gas cylinders at
rear of welder.
Order K842
Paralleling Kit
Permits paralleling of two
power sources.
Order K1611-1 (For Idealarc®
DC-600 Above Code 10500)
Order K1897-1 (For Idealarc DC-
600 Below Code 10500)
STICK OPTIONS
Accessory Kit
For stick welding. Includes 35 ft.
(10.7m) 2/0 electrode cable with lug,
30 ft. (9.1m) 2/0 work cable with
lugs, headshield, filter plate, work
clamp and electrode holder.
Order K704
Remote Output Control
For remote output of welding
voltage. Consists of control box with
25 or 100 ft. (7.6 or 30m) of four
conductor cable and 6 pin
MS-type connector.
Order K857 for 25 ft. (7.6m)
Order K857-1 for 100 ft. (30m)
Remote Control Cable Adapter
Y connection adapter for
connecting K857 Remote Voltage
Control (6 pin plug connection) and
wire feeder input cable (14 pin plug
connection) to Idealarc DC-600 14
pin receptacle.
Order K864
TIG OPTIONS
Pro-Torch TIG Torches
Light and easy to use, these torches
feature flexible head models that
give you the power of maximum
versatility and maneuverability. A
molded, knurled handle gives you a
sure grip so you can focus on the
weld. Available in either air-cooled or
water-cooled designs.
See publication E12.150
TIG OPTIONS, CONT.
TIG Module
Portable, high frequency unit with
gas valve for TIG welding. Rated at
300 amps/60% duty cycle.
Order K930-2
Control Cable
Connects TIG Module to
power source.
Order K936-1 for 9-pin to 14-pin
Control Cable Extension
Allows the TIG Module to be
operated at distances up to 200 ft.
(61m) from the power source.
Available in 45 ft. (13.7m) sections.
Order K937-45
Docking Kit
Provides a means to “dock” the TIG
Module on top of a flat-roofed
power source, or any other flat
surface measuring at least 10 x 15
in. (254 x 381mm). It includes a
latch and provisions for a user-
supplied padlock to lock the TIG
Module in place.
Order K939-1
Hand Amptrol
Provides 25 ft. (7.6m) of remote
current control for TIG welding.
(6 pin plug connection). Velcro
straps secure torch.
Order K963-3
Foot Amptrol
Provides 25 ft. (7.6m) of remote
output control for TIG welding. (6 pin
plug connection).
Order K870
Amptrol Adapter Kit
Adapts Amptrol's 6-pin MS-type
plug connection to terminal strip on
power source.
Order K843
Water Valve Kit
For use with water-cooled TIG torch.
Installs inside of TIG Module.
Order K844-1
Deluxe Adjustable Gas Regulator
and Hose Kit
Accommodates CO
2
, argon, or
argon-based gas cylinders.
Includes a cylinder pressure
gauge, dual scale flow gauge and
4.3 ft. (1.3m) gas hose.
Order K586-1