Filter
Top Products
POWER WAVE
®
i400
Input Power 200/230/380-415/460/575
3 Phase Input
50/60 Hz
*
Single product number - CE compliance is provided with a CE Filter
Kit. Input voltage is limited to 380-415/3/50/60 with kit installed.
Duty Cycle 350A/34V/100%
400A/36V/60%
420A/37V/40%
* No derating for CV versus Pulse modes.
Output Current Range 5-420 ADC
* Best in class rated machine for power.
Output Voltage Range 10-37 VDC
Cooling Method Fan As Needed™ (F.A.N.)
* Cooling fan runs when the output is energized, and for 5 minutes after
t
he output has been turned off.
Power Factor at Rated Output .95
IP Rating IP21S
Welding Output CV/DC
Welding Processes CV-MIG, Pulsed-MIG, Flux-cored, Metal-cored, Stainless, Aluminum
Dimensions - H x W x D in (mm) 21 x 18.5 x 23.6 in (533 x 470 x 600 mm )
Net Weight - lbs (kg) 209 lbs. (95 kg)
Volume 0.150 m
3
Universal Certifications CE, CSA
C/UL
, C-Tick
AUTODRIVE
™
4R90
Wire Drive 4 Driven Rolls
* 4 Gear powered rolls versus competitive 2 gear driven rolls & 2 idle rolls
Motor Type Permanent Magnet DC Motor
Tachometer Type Magnetic High Resolution Dual Channel
Wire Feed Speed Range in/min (m/min) AutoDrive™ 4R90 - 50 to 800 in/min (0.8 to 20.3 m/min)
Max Wire Size Range AutoDrive™ 4R90
Solid: .023 - .045” (0.6 – 1.2 mm)
Cored: .035 - .045 (0.9 - 1.2 mm)
Dimensions – L x W x H inches (mm) 9.1 x 7.5 x 8.4 inches (231 x 141 x 213 mm)
Net Weight - lbs (kg) 14.5 lbs. (6.5 kg)
Universal Certifications CE, CSA
C/UL
, C-Tick
THE LINCOLN ELECTRIC COMPANY
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
TECHNICAL SPECIFICATIONS
C U S T O M E R AS S IS TA N C E PO L IC Y
The business ofThe Lincoln Electric Company
®
is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge isto meet the needs of
our customers and to exceed their expectations. On occasion, purchasers mayask Lincoln Electricfor information or advice about their use of our products. Our employees respond to
inquiries to the best of their ability based on information provided to them by thecustomers and the knowledge they may haveconcerning the application. Our employees, however, are not
in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume
any liability with respect to such information or advice. Moreover, the provision of suchinformation or advice does not create, expand, oralter any warranty on our products. Any express or
implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty offitness for any customers’ particular purpose is
specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electricis solely within thecontrol of, and remains the soleresponsibility of the
customer. Many variables beyond the control ofLincoln Electric affect the results obtained inapplying these types of fabrication methods andservice requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.