Filter
Top Products
08-28-2007
SQUIRTGUNS K112 & K113
Use only the parts marked “x” in the column under the
heading number called for in the model index page.
# Indicates a change this printing.
P-103-D.1
ITEM DESCRIPTION PART NO. QTY. 123 4 56789
P-103-D.1
de o Gu s de o Gu s de o Gu s de o Gu s
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration
For Squirtgun K113, use the parts marked “X” in Column 1 or 3 (see note).
For Squirtgun K112, use the parts marked “X” in Column 2 or 4 (see note).
For Squirtgun K112 (500 Amp), use the parts marked “X” in Column 5 (see note).
ø This part is obsolete and no longer available.
1 Cap S12955 1 X X • • •
1 Cap T14181 1 • • X X X
2
Housing & Nozzle Asbly, Includes:
(5/64, Stenciled)
M10670-7 1 X • X • •
2
Housing & Nozzle Asbly, Includes:(
3/32, Stenciled)
M10670-6 1 • • X •
2 Housing & Nozzle Asbly, Includes: M10670-4
ø
1•X•X•
2 Housing & Nozzle Asbly, Includes: M10670-5 1 • • • • X
2A Nozzle S13813-1 1 • X • X X
2A Nozzle (3/32) S13813-3 1 • • X • •
2A Nozzle (5/64) S13813-4 1 • • X • •
2A1 Nozzle Liner, Tight Wound Steel Spring
(For 5/64, No Stencil) KP2095-1 1 X • X • •
2A1 Nozzle Liner, Tight Wound Steel Spring
(For 5/64 Stenciled) KP2095-12 1 • • X • •
2A1 Nozzle Liner, Tight Wound Steel Spring
(For 3/32 Stenciled) KP2095-11 1 • • X • •
2A1 Nozzle Liner, Tight Wound Steel Spring T12931-3 1 • X • X X
2A2 Ceramic Insert KP2094-2 1 • • X • •
2A3 Insert Retainer T12977-1 1 • • X • •
2A4 Hollow Lock Set Screw T12932-1 1 X X X X X
2B Housing S13486-1
ø
1•X•X•
2B Housing S13486-2 1 X • X • X
3 Collar S12964-1 1 X X X X X
4 Nozzle Flux Cone (S12957-1/2) KP1968-1 1 X X X X X
4 Nozzle Flux Cone (S12957-5/8) KP1968-5 1 X X X X X
4 Nozzle Flux Cone (S12957-3/4) KP1968-4 1 X X X X X
4 Nozzle Flux Cone (S12957-13/16) KP1968-2 1 X X X X X
4 Nozzle Flux Cone (S12957-15/16) KP1968-3 1 X X X X X
4 Chamfered 3/4” Nozzle Flux Cone T14278 1 X X X X X
5 Contact Tip, 1/16” Electrode T12011-1/16 KP2086-2 * • X • X •
5 Contact Tip, 5/64” Electrode T12011-5/64 KP2086-4 * X • X • •
5 Contact Tip, 3/32” Electrode T14050-3/32 (Note 1) T14050-3/32 * • • X • •
5 Contact Tip, 3/32” Electrode
T12011-3/32 (1) KP2086-3 (1)
••X••
5 Contact Tip, 1/16” Electrode T14050-1/16 (Note 1) T14050-1/16 * • • • • X
Nozzle Extension K113-5/64, 1-3/4 Stickout S13027-4 1 X • X • •
Nozzle Extension K113-3/32, 1-3/4 Stickout S13027-5 1 X • X • •
Nozzle Extension K113-3/32, 2-1/8 Stickout S13027-3 1 X • X • •
Guide Tips for Long Stickout Extensions K113-5/64
KP2104-2 1 X • X • •
Guide Tips for Long Stickout Extensions K113-3/32
KP2091-1 1 X • X • •
Guide Tips for Long Stickout Extensions K113-3/32
T14435-3/32 (1)
X•X••
* As Required
(1) To be used only when using S13027-5 extension
NOTE 1: When tip life is limited by tip being
fused over the use of T14726-[ ] tips
may result in a lower overall cost.
#
#
#