Filter
Top Products
A-1
INSTALLATION
DEMO ZONE
A-1
TECHNICAL SPECIFICATIONS - Demo Zone (K-1854-1)
Voltage Specification Input Connection
Specification
230 VAC single phase, 40 amps Type 6-50P plug
ELECTRICAL INPUT REQUIREMENTS
RATED OUTPUT
HEIGHT WIDTH DEPTH WEIGHT
53.00 in. 66.00 in. 53.00 in. 1707 lbs. (w/o gas cylinders)
2467 lbs. (with gas cylinders)
1346.2 mm 1676.4 mm 1346.2 mm 774.3 kg. (w/o gas cylinders)
1119.0 kg. (with gas cylinders)
The Demo Zone is intended for display and demonstration use. It is intended for light duty operation.
The Demo Zone operator must observe the 40 amp input current limitation. Because of the input power
limitation, power sources (except Ranger 250) when used at maximum output must be operated at low
duty cycles. Refer to Welder Operation - Duty Cycle section of this manual.
PHYSICAL DIMENSIONS