Filter
Top Products
[3]
www.lincolnelectric.com
Multi-Process Switch
3-position switch allows
quick and easy change
from electrode positive or
negative semiautomatic/
automatic wire feed welding
to stick or air carbon arc
gouging.
Order K804-1.
Remote Output Control
Consists of a control box
with choice of two cable
lengths. Permits remote
adjustment of output.
6 pin connection.
Order K857 for 25 ft.
(7.6m) or K857-1 for
100 ft. (30.5m).
Deluxe Adjustable Gas
Regulator and Hose Kit
Accommodates CO
2
, Argon,
or Argon-blend gas cylin-
ders. Includes a cylinder
pressure gauge, dual scale
flow gauge and 4.3 ft.
(1.3m) gas hose.
Order K586-1.
Undercarriage
Platform undercarriage with
mountings for two gas cylin-
ders at rear of welder.
Order K841.
Accessory Kit
For stick welding. Includes
35 ft. (10.7m) 2/0 electrode
cable with lug, 30 ft. (9.1m)
2/0 work cable with lugs,
headshield, filter plate,
cover plate, work clamp
and electrode holder.
Order K704.
TIG Module
Supplies high frequency for
superior starting, contactor
control, remote control
capability and a gas valve
for TIG welding.
Order K930-2.
Docking Kit
Provides a means to “dock”
the TIG Module on top of a
flat-roofed power source, or
any other flat surface meas-
uring at least 10 x 15 in.
(254 x 381mm). It includes a
latch and provisions for a
user-supplied padlock to
lock the TIG Module in
place.
Order K939-1.
Hand Amptrol™
Varies current for making
critical TIG welds. Fastens
to the torch for convenient
thumb control. Comes with
a 25 ft. (7.6m) cable. Fully
extend the slide forward to
achieve maximum current.
Returning to the start posi-
tion finishes the weld and
starts the afterflow cycle.
Order K963-1
(For smaller handle 9, 17
or 20 series torches).
Order K963-2
(For larger handle 26 or 18
series torches).
Foot Amptrol™
Varies current for making
critical TIG welds. Depress
pedal to increase current.
Depressing pedal fully
achieves maximum set cur-
rent. Fully raising the pedal
finishes the weld and starts
the afterflow cycle. Includes
25 ft. (7.6m) control cable.
Order K870.
Remote Control
Adapter
Y connection adapter for
connecting K857, K963 or
K870 (6-pin plug connec-
tion) and wire feeder input
cable (14-pin plug connec-
tion) to power source’s 14
pin receptacle.
Order K864.
Amptrol Adapter Kit
Adapts Amptrol’s 6-pin
MS-type plug connection
to terminal strip on power
source.
Order K843.
Water Valve
For use with TIG Module.
Shuts off water flow when
the arc is extinguished
when using Magnum
®
water-cooled TIG torches.
Order K844-1.
TIG Control Cable
Extension
Allows the TIG Module to
be operated at up to 45 ft.
(13.7m) from power source.
Connects between the 2 ft.
(0.6m) control cable and
the TIG Module.
Order K937-45.
Recommended Options