Filter
Top Products
Magnum
®
SG Spool Gun
www.lincolnelectric.com
[3]
RECOMMENDED OPTIONS
GENERAL OPTIONS
SG Control Module
Provides control of wire speed
and gas flow. For use with CV
power sources and CV Engine
Drives with output contactor.
Order K488
Control Module Input Cable
– Terminal Strip and Lug
Required for connection of control
module to power source. Consists
of control and electrode cables
and gas line. 10 ft. (3.0 m). For
Lincoln
®
power sources having
terminal strip and lug connec-
tions.
Order K492-10
Control Module Input Cable
– 14-pin MS-type
& Twist-Mate
TM
Required for connection of control
module to power source. Consists
of control and electrode cables
and gas line. 10 ft. (3.0 m). For
Lincoln
®
power sources having
14-pin MS-type control connec-
tions and Twist-Mate
TM
power
connections.
Order K493-10
Control Module Input Cable
– 14-pin MS-type, 115 Volt
Plug
& Lug
Required for connection of control
module to power source. Consists
of control and electrode cables
and gas line. 10 ft. (3.0 m). For
Lincoln
®
engine driven power
sources with 14-pin MS-type
connection, separate 115V
NEMA receptacles and lug
power connections.
Order K691-10
Magnum
®
SG Spool Gun Control
Cable Adapter
Allows the K487-25 Magnum
®
SG
Spool Gun’s 6-pin control cable
plug to connect to the Power
MIG
®
255C’s 7-pin spool gun
control cable receptacle.
Order K2445-1
SP-255/Wire-Matic
™
Spool Gun
Adapter Kit
Enables the SP-255 and Wire-
Matic
TM
255 wire feed welders to
accept the K487-25 spool gun.
Order K672-1
Power MIG
®
215 and Power MIG
200 Spool Gun and Adapter Kit
This kit includes the K487-25 spool
gun, spool gun holder, gas hose kit
and easy spool gun connection in
the wire drive compartment of the
Lincoln Power MIG 215 and Power
MIG 200 wire feed welder.
Order K1809-1
Power MIG
®
255 Spool Gun
Adapter Kit
(1)
Enables the Power MIG 255
wire feed welder to accept the
K487-25 Magnum
®
SG Spool Gun
or a Prince
®
XL Spool Gun.
(Includes a spool gun holder).
Order K2310-1
Spool Gun Holder
for Power MIG
®
Provides neat storage of spool
gun cable, and gas hose on
power source. Also provides hard-
ware for routing gas hose inside
power source when using a
Prince XL gun. Note: Included in
K1809-1 and K2310-1.
Order K1738-1
EXPENDABLE PARTS
Gas Diffuser KP2010-6
Contact Tip .023-.025 KP2010-7B1
Drive Roll Smooth KP2010-8
Drive Roll Knurled KP2010-9
Teflon Liner KP2010-1
Plastic Guide Tube KP2010-2
Contact Tip Notched .030" KP2010-3B1
Contact Tip Notched .035" KP2010-4B1
Contact Tip Notched 3/64" KP2010-5B1
Description Order Number Description Order Number
Note: Prince
®
XL Gun is a registered trademark of MK Products, Inc.
(1)
Not required for Power MIG
®
255C.