Filter
Top Products
Ranger
®
225 | [ 5 ]
GENERAL OPTIONS
Power Plug Kit (20 amp)
Provides four 120V plugs rated
at 20 amps each, and one dual
voltage, full KVA plug rated at
120/240V, 50 amps. 120V plug may
not be compatible with
common household receptacles.
Order K802N
Full-KVA Power Plug
One dual voltage plug rated at
120/240V, 50 amps.
(NEMA 14-50P)
Order T12153-9
GFCI Receptacle Kit
Includes one UL approved 120V
ground fault circuit interrupter
duplex type receptacle and
installation instructions. Replaces the
factory-installed 120V duplex
receptacle. Each receptacle of
the GFCI duplex is rated at 20 amps.
Maximum total current from the
GFCI duplex is limited
to 20 amps. Two kits required.
Order K1690-1
Spark Arrestor Kit
Attaches to muffler exhaust tube.
Virtually eliminates spark
emissions.
Order K1898-1
Canvas Cover
To protect the Ranger
®
225 when
not in use. Made from attractive red
canvas material that is flame
retardant, mildew resistant and
water repellent.
Order K886-2
All-Terrain Undercarriage
For moving by hand at
construction sites. Maneuvers over
obstacles. Heavy-duty
puncture-resistant (inner tube and
sealant) tires.
Order K1737-1
Factory Undercarriage
For moving by hand on smooth
surface floors. Heavy-duty, puncture-
resistant (inner tube and sealant)
tires and front caster. Convenient
steering handle.
Order K1770-1
Welding Gas Cylinder/
LPG Tank Holder
Holds welding gas cylinder or LPG
tank (for products with LPG engine).
For LPG: Use one holder for LPG
tank and a second holder for
welding gas cylinder. Both holders
will attach to the K1770-1
undercarriage.
Order K1745-1
Small Two Wheel Welder Trailer
For heavy-duty road, off-road, plant
and yard use. includes pivoting jack
stand, safety chains, and 13 in.
(330 mm) wheels. Stiff .120 in.
(3.0 mm) welded rectangular steel
tube frame construction is
phosphate etched and powder coat
painted for superior rust and
corrosion resistance. Low sway
suspension gives outstanding
stability with manageable tongue
weight. Wheel bearings are packed
with high viscosity, high pressure,
low washout Lubriplate
®
grease.
Includes a Duo-Hitch
™
, a 2 in.
(51 mm) ball/lunette eye
combination hitch. Overall width
60 in. (1524 mm). Overall length
110 in. (2794 mm).
Order:
K2635-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
STICK OPTIONS
Accessory Kit
For stick welding. Includes 35 ft.
(10.7 m) #2/0 electrode cable with
lug, 30 ft. (9.1 m) #2/0 work cable
with lugs, headshield, filter plate,
work clamp and electrode holder.
400 amp capacity.
Order K704
Accessory Kit
For stick welding. Includes 20 ft.
(6.1 m) #6 electrode cable with lug,
15 ft. (4.6 m) #6 work cable with
lugs, headshield, filter plate, work
clamp, electrode holder and sample
pack of mild steel electrode. 150
amp capacity.
Order K875
TIG OPTIONS
Pro-Torch
™
PTA-26V TIG Torch
Air-cooled 200 amp torch (2 piece)
equipped with valve for gas flow
control. 25 ft. (7.6 m) length.
Order K1783-9
Magnum
®
Parts Kit
Provides all the torch accessories
you need to start welding. Parts kit
provides collets, collet bodies, a
back cap, alumina nozzles and
tungstens in a variety of sizes, all
packaged in an easy to carry
reclosable pack.
Order KP509 for PTA-26V
Square Wave
™
TIG 175
For AC TIG welding with square
wave performance, use the AC
generator of the engine-driven
welder to supply the power (full
rated output may not be available).
Easy setup. Includes torch, foot
Amptrol
®
, gas regulator and hose.
Requires the K1816-1 Full KVA
Adapter Kit.
Order K1478-5
Invertec
®
V205-T AC/DC
One-Pak
®
Package
For AC TIG welding with square
wave performance, use the AC
generator of the engine-driven
welder to supply the power. Easy
setup. Includes torch, parts kit,
regulator and hose kit, Twist Mate
™
torch adapter, work cable with Twist
Mate
™
end and foot Amptrol
®
.
Requires the K1816-1 Full-KVA
Adapter Kit.
Order K2350-2
Full - KVA Adapter Kit
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-
50P) to the full-KVA receptacle on
engine-driven welders.
Order K1816-1
WIRE FEEDER OPTIONS
LN-25 PRO Wire Feeder
Portable CC/CV unit for flux-cored
and MIG welding with MAXTRAC
®
wire drive system. Includes gas
solenoid and internal contactor.
Order K2613-5
K126
™
PRO Innershied
®
Gun
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062-5/64 in.
(1.6-2.0 mm) wire. Includes
K466-10 Connector Kit.
Order K126-12
Drive Roll and Guide Tube Kit
For .068-.072 in. (1.8 mm) cored or
solid steel wire.
Order KP1697-068
Magnum
®
PRO 350 Ready-Pak
®
15 ft., .035-5/64 in.
Magnum
®
PRO MIG/flux-cored
welding guns are rated 100% duty
cycle. The guns are designed for
high amperage, high duty cycle
applications in extreme
environments where heat-resistance
and fast serviceability are key.
Order K2652-2-10-45
Drive Roll and Guide Tube Kit
For .035-.045 in. (0.9-1.1 mm) solid
steel wire.
Order KP1696-1
POWER MIG
®
180C
Premium compact wire welder with
continuous voltage control for MIG
and flux-cored welding. 30 to 180
amp output range. Get input power
from the AC generator of the engine-
driven welder with the K1816-1 Full-
KVA Adapter Kit (required). Add the
K2532-1 Magnum
®
100SG Spool
Gun for aluminum MIG welding.
Order K2473-1
RECOMMENDED ACCESSORIES TO EXPAND MACHINE CAPABILITIES