Filter
Top Products
PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE
Customer Assistance Policy
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to
exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our pos-
session at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any
kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for
updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many
variables beyond the control of Lincoln Electric affect the results obtained in applying this type of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
THE LINCOLN ELECTRIC COMPANY
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
LN-23P Wire Feeder Order Form
Required Options
Magnum Self-Shielded
Gun
Rated 350 amps, 60% duty
cycle, 90° nozzle. For .068
through 5/64” (1.7 through
2.0 mm) Innershield wire.
Includes reduced speed
switch. 10 ft. (3.0m).
Order K345-10.
Magnum Self-Shielded
Gun
For lighter weight and easier
handling. Rated 250 amps,
60% duty cycle. For .068
through 5/64” (1.7 through
2.0 mm) Innershield wire.
Includes reduced speed
switch. 10 ft. (3.0m).
Order K355-10.
LN-23P Adapter Kit
Allows the LN-23P to be con-
nected to the power source,
but only one can be used at
a time. 115 AC input.
Order K350 - for Terminal
Strip connection.
Order K350-1 - for
14 Pin MS-type connection.
Power LN-23P Adapter
Source Kits Required
Pipeliner 200, SA-250, Classic II, Classic 300 K350-1 Adapter Kit
K632-1 Wire Feed Module
CV-300, CV-400, CV-655, DC-400, DC-600, K350-1 Adapter Kit
DC-655, Ranger 250, Ranger 305, Commander 300,
Commander 500
SAE-400, SAE-400 Weld ‘N Air K350 Adapter Kit
K385-1 CV Adapter
Power Sources and Adapters
LN-23P Wire Feeder K316-L
Required Options
LN-23P Adapter Kit: for Terminal Strip Connection K350
for 14 Pin MS-type Connection K350-1
Magnum Self-Shielded Gun - 350 Amps K345-10
Magnum Self-Shielded Gun - 250 Amps K355-10
Recommended Power Sources
CV-300 See publication E4.20
CV-400 See publication E4.30
CV-655 See publication E4.40
DC-400 See publication E5.20
DC-600 See publication E5.40
DC-655 See publication E5.46
Ranger 250 See publication E6.103
Ranger 305 See publication E6.117/E6.118
Pipeliner 200 with Wire Feed Module See publication E6.131/E6.132
SA-250 with Wire Feed Module See publication E6.160
Classic II with Wire Feed Module See publication E6.140
Classic 300 with Wire Feed Module See publication E6.155/E6.156
Commander 300 See publication E6.205
Commander 500 See publication E6.215
SAE-400 with CV Adapter See publication E6.180
SAE-400 Weld ‘N Air with CV Adapter See publication E6.185
TOTAL: