Filter
Top Products
RECOMMENDED OPTIONS
GENERAL OPTIONS, CONT.
Control Cable to Terminal Strip
Adapter
Connects 14-pin control cable to
power sources with terminal strip.
Order K1798
Gas Solenoid Kit
Includes solenoid valve and
mounting bracket.
Order K437 (below code 9132)
Order K425 (above code 9131)
Wire Feed Speed Meter Kit
Contains an analog meter which
indicates welding voltage and wire
feed speed directly on a 0-60 volt
scale.
Order K261
Burnback Kit
Provides adjustable delay of power
source output shut off to prevent
electrode sticking in crater when
using high wire feed speeds.
Includes a cold inch switch.
Order K202
Dual Procedure Kit
Allows the use of two welding
procedures with one gun.
Procedures can be changed by the
flick of the switch – even while
welding. For LN-9 only
Order K319
Magnetic Flux Screen Separator
For submerged arc welding.
Removes foreign magnetic particles
from reused flux.
Order K58
Flux Screen
For submerged arc welding.
Removes large particles from
reused flux. Includes air-driven
vibrator.
Order K310
Wire Reel and Flux Tank
Assembly
Includes flux tank, undercarriage,
and reel and brake assembly in
open shroud.
Order K305
GENERAL OPTIONS, CONT.
Continuous Flux Feeding Tank
Assembly
For submerged arc welding.
Includes air filter, pressure
regulator, gauge, tank, 18 ft. (5.4
m) flux hose, funnel and lift bail
assembly to mount wire feeder.
Order K320
Undercarriage
Includes mounting frame, front
casters, rear wheels and handle
for hand towing. For use with Wire
Reel Stand.
Order K163
Squirtmobile
Self-propelled trackless carriage
carriers K114 Mechanized SAW
Gun on long welds for automatic
welder economy without high
fixtures costs. Requires a K161
Power Pack to drive unit.
Order K62
Mechanized Hand Travel Unit
Carries the K114 Mechanized
SAW Gun along the joint at a
preset travel speed to help the
operator make better welds 10%
to 25% faster than with manual
travel. Speed range is 7-60 ipm
(0.2-1.5 m/min). Requires a K161
Power Pack to drive unit.
Order K110
Power Pack
Includes travel mag-amp circuit
required when using either a
Squirtmobile or Mechanized Hand
Travel Unit with a K114 SAW gun.
Mounts near power source.
Connect to the power source for
input power. 50 ft. (15 m).
Order K161-50
Portable Digital Wire Feed
Speed Meter
When clamped on an exposed
section of continuously fed
electrode, unit reads wire feed
speed in inches per minute.
Order K283
C U S T O M E R A S S I S TA N C E P O L I C Y
The business of The Lincoln Electric Company
®
is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our
customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the
best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the
information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such
information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the
information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
THE LIN COLN ELECT RIC C OMPA NY
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com