Filter
Top Products
User Manual
Introduction
Thank you for purchasing the LINDY 8 Port HDMI 1.3b Splitter. This device is a high performance HDMI
amplifier and splitter which allows a single HDMI source to be displayed simultaneously on up to 8
different displays.
Package Contents
• LINDY HDMI 1.3b Splitter
• 5V DC Multi Country PSU
• This manual
Features
• HDMI 1.3b, HDCP 1.1 and DVI 1.0 compliant
• Deep colour up to 8 & 12 bit, 1080p (24/60Hz)
• Splits a single HDMI source without any signal loss for use with up to 8 displays
• Supports multi-channel audio:
o LPCM 7.1CH
o Dolby TrueHD
o Dolby Digital Plus
o DTS-HD Master
• When used with computers, supports DVI-D resolutions up to UXGA (1600 x 1200)
• Supports xvYCC and CEC bypass
• Built in EDID simulator and HDCP keyset allows each output to work independently when
connecting to an HDMI display
• Supports both DVI source and display devices when using DVI/HDMI adapter cables
• The input/output distances can be up to 15m with 8 bit colour depth and 10m with 12 bit colour
depth (when using LINDY Premium Gold Cables)
Connections & Operation
Make sure all devices are switched off before connecting any equipment! Once all the connections have
been made, switch on the devices in this order: displays, HDMI Splitter, source device.
HDMI Output – Connect your displays to the 8 HDMI output
ports
8/12 Bit – Supports 8/12 bit deep colour. Only available when
EDID setting is in STD mode
2 CH/Multi CH – Supports 2 Channel or Multi Channel Audio.
Only available when EDID setting is in STD mode
STD/TV – STD mode will allow you to adjust deep colour &
audio channels. TV mode will allow the EDID information to be
sent from the source
Sys Reset – System reset function
Power – Power Switch
HDMI Input – Connect to your source equipment
Note: When using both 8 & 12 bit displays, make sure
the splitter is set to 8 bit. If all the displays are 8 bit or
12 bit then set the splitter accordingly. The splitter will
not detect individual colour depths on your displays.