Filter
Top Products
10
First, loosen the two wing nuts on the holder and insert the
blades (A) and (B), so that they contact the sides (C) and
(D). Then tighten the wing nuts.
Immerse the dressing stone in water for 2 or 3 minutes
before sharpening. Hold the holder so that the blades both
contact the dressing stone for simultaneous sharpening at
the same angle.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other mainte-
nance or adjustment should be performed by Makita Autho-
rized or Factory Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
• 110 mm (4-3/8”) Planer blade
• Sharpening holder assembly
• Blade gauge
• Guide rule
• Dressing stone
• Socket wrench
• Dust bag
1. Wing nut
2. Blade (A)
3. Blade (B)
4. Side (C)
5. Side (D)
1
4
2
3
5
001611
001612