Filter
Top Products
2.
When exhausting dust
from
indoors to outdoors
Installing
hoses
Attach one hose to the inlet and another
The total length of exhaust hose and suc-
hose to the outlet in the same manner
as
mentioned in page.
5.
CAUTION
:
tion hose should be
less
than
10
meters
(32
feet).
Otherwise the tool may become
c
I
ogged.
”
MAINTENANCE
CAUTION
:
Always be sure that the tool
is
switched’off and unplugged before attempting to perform
inspection or maintenance.
The tool will stop when the carbon brushes wear to
a
certain length. When this occurs,
both carbon brushes should be replaced.
To maintain product SAFETY and RELlABl LITY, reparis, maintenance or adjustment
including brush inspection and replacement should be performed by Makita Authorized
or
Factory Service Centers, always using Makita replacement parts.
7