Filter
Top Products
11.
When operating the saw, keep the
cord away from the cutting area and
position
it
so
that
it
will
not
be
caught on the workpiece during the
cutting operation.
Operate
with
proper hand support,
proper work support, and supply
cord routing away from the work
area.
A
TYPICAL ILLUSTRATION
OF
PROPER SUPPORT,
AND
SUPPLY
CORD
ROUTING.
I
Fig.
;
WARNING:
It
is important to support the work properly and to hold the saw firmly to pre-
vent
loss
of
control which could cause personal injury. Fig.
2
illustrates typical
hand support of the saw.
12.
Never attempt
to
saw
with
the cir-
cular saw held upside down
in
a
vise. This can lead to serious acci-
dents, because
it
is extremely dan-
gerous.
13.
Before setting the tool down after completing a cut, be sure that the lower (tele-
SAVE THESE INSTRUCTIONS.
scoping) guard has closed and the blade has come to a complete stop.
6