Filter
Top Products
Installing Makita
jig
saw
blade
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the blade.
Use the hex wrench to loosen the bolt.
With the blade teeth facing forward, insert
the blade into the blade holder
as
far
as
it
will go.
Make sure that the back edqe of the blade
J'g
saw
fits into the roller and tighten the bolt
securely with the hex wrench.
CAUTION
:
Use
a
lubricant or cutting oil between the blade and roller when cutting iron or composi-
tion board, etc. Failure to do
so
will shorten the service life of your blade and roller.
5