Filter
Top Products
Finishing edges
To
trim edges or make dimensional adjust-
ments, run the blade lightly along the cut
edges.
For smoother cutting of plywoods or other
materials with easily splintered surfaces,
the wood may be coated or transparent
tape used over your cutting line.
Using guide rule (Rip fence)
When cutting widths of under 150mm(6")
repeatedly, use of the guide rule will assure
fast, clean cuts.
Attaching guide rule (Rip fence)
To
attach the guide rule (rip fence), secure
the rule holder to the base with the hex
screw (do not tighten).
Insert the guide rule between the base and
the rule holder. Now tighten the hex screw
with the hex wrench.
Guide
10