Filter
Top Products
6
NOTE:
• Occasionally lubricate the roller.
Hex wrench storage
1
2
008010
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
Anti-splintering device
1
2
008028
For splinter-free cuts, the anti-splintering device can be
used. To install the anti-splintering device, move the tool
base all the way forward and fit it from the back of tool
base. When you use the cover plate, install the
anti-splintering device onto the cover plate.
CAUTION:
• The anti-splintering device cannot be used when
making bevel cuts.
Cover plate
1
2
008027
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
Dust extraction
The dust nozzle (optional accessory) is recommended to
perform clean cutting operations.
1
2
001921
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
The dust nozzle can be installed on either left or right
side of the base.
001922
Then connect a Makita vacuum cleaner to the dust
nozzle.
1
2
008019
CAUTION:
• If you try to remove the dust nozzle forcibly, the
hook of the dust nozzle can be diminished and
removed unintentionally during operation.
OPERATION
CAUTION:
• Hold the tool firmly with one hand on the main
handle when performing the tool. If necessary, the
front part of the tool may be supported by the other
hand.
1. Dust nozzle
2. Hose for
vacuum cleaner
1. Dust nozzle
2. Base
1. Cover plate
2. Base
1. Base
2. Anti-splintering
device
1. Base
2. Hex wrench