Filter
Top Products
9
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Adjusting depth of cut
CAUTION:
• After adjusting the depth of cut, always tighten the lever
securely.
Loosen the lever on the side of the rear handle and move the
base up or down. At the desired depth of cut, secure the
base by tightening the lever.
For cleaner, safer cuts, set cut depth so that no more than
one blade tooth projects below workpiece. Using proper cut
depth helps to reduce potential for dangerous KICKBACKS
which can cause personal injury.
Sighting
When cutting, align the A position on the front of the base
with your cutting line.
Dust collection
This tool is equipped with the dust box to collect dust and cut
chips. When the dust box is about two thirds full, empty its
contents. To do so, press the lever to unlock the dust cap and
open it. Tip the rear of the tool down to empty the dust box.
Cleaner cutting operations can be performed by connecting
this tool to Makita vacuum cleaner. Remove the rubber cap
from the dust cap and connect the vacuum cleaner hose to
the dust cap.
1. Depth adjusting lever
1
001344
1. Base
1
A
001379
1. Lever
2. Rubber cap
3. Dust cap
1
2
3
001391