Filter
Top Products
NEVER
place your hand or fingers
behind the saw. If kickback occurs,
the saw could easily jump backwards
over your hand, possibly causing
severe injury.
Fig.
3
IO.
Lower Guard. Raise lower guard with the retracting handle.
11.
Adjustments. Before cutting be sure depth and bevel adjustments are tight.
12.
Use Only Correct Blades
In
Mounting. Don’t use blades
with
incorrect size
holes. Never use defective or incorrect blade washers or bolts.
13.
Avoid Cutting Nails. Inspect for and remove all nails from lumber before
cutting.
14.
Operate
with
proper hand support
and proper workpiece support.
I
Fig.
L
WARNING
:
A
typical illustration
of
proper
hand
support
and
workpiece support.
It
is important to support the workpiece properly and to hold the saw firmly
to prevent
loss
of
control which could cause personal injury. Fig.
4
illustrates
typical hand support of the saw.
7