Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER AND TOOL
1. The Charger and the tool are specifically designed to work together. Do not
attempt to charge any other cordless tool with this Charger. Do not attempt
to charge the tool with any other charger.
2.
Do
not charge the tool when temperature is BELOW 10°C (5OoF)
or
ABOVE
45OC (113OF).
3. Do not use charger
in
damp or wet locations.
4.
Do not attempt to use a step-up transformer, an engine generator or DC pow-
5.
Do not store the tool
in
locations where the temperature may reach or ex-
6.
Do not incinerate the tool even
if
it
is severely damaged
or
is completely worn
er receptacle.
ceed 5OoC (122OF).
out. The tool can explode
in
a fire.
ADDITIONAL SAFETY RULES
1. Be aware that this tool is always
in
an operating condition, because
it
does
2. Always be sure you have a firm footing.
3. Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls, floors
or
wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL
PARTS
OF
THE TOOL!
Hold the tool only
by
the insulated grasping surfaces to prevent electric shock
if
you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6.
Do not leave the tool running. Operate the tool only when hand-held.
7.
Do not touch the
drill
bit
or
the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5