Filter
Top Products
6
2. Do not charge the tool when temperature
is BELOW 10°C (50°F) or ABOVE 40°C
(104°F).
3. Do not attempt to use a step-up trans-
former, an engine generator or DC power
receptacle.
4. Do not store the tool in locations where
the temperature may reach or exceed 50°C
(122°F).
5. Do not incinerate the tool even if it is
severely damaged or is completely worn
out. The tool can explode in a fire.
6. Do not charge inside a box or container of
any kind. The tool must be placed in a well
ventilated area during charging.
SAVE THESE INSTRUCTIONS