Filter
Top Products
5
16. Store idle tools out of reach of children and other untrained persons.
Tools are
dangerous in the hands of untrained users.
17. When battery pack is not in use, keep it away from other metal objects like: paper clips,
coins, keys, nails, screws, or other small metal objects that can make a connection
from one terminal to another.
Shorting the battery terminals together may cause sparks, burns,
or a fire.
18. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools
with sharp cutting edge are less likely to bind and are easier to control.
19. Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool’s operation. If damaged, have the tool serviced
before using. Many accidents are caused by poorly maintained tools.
20. Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may create a risk of injury when used on another tool.
Service
21. Tool service must be performed only by qualified repair personnel.
Service or
maintenance performed by unqualified personnel may result in a risk of injury.
22. When servicing a tool, use only identical replacement parts. Follow instructions in the
Maintenance section of this manual.
Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of shock or injury.
SPECIFIC SAFETY RULES
USB026-2
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict
adherence to cordless screwdriver safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring.
Contact with a “live” wire will also make exposed
metal parts of the tool “live” and shock the operator.
2. Be aware that this tool is always in an operating condition, because it does not have to
be plugged into an electrical outlet.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause
serious personal injury.