Filter
Top Products
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on
the
nameplate of the tool. A power source with voltage greater than that specified
for
the
tool can result
in
SERIOUS INJURY to
the
user
-
as
well as damage to
the tool. If in doubt,
DO
NOT PLUG IN THE TOOL. Using
a
power source with
voltage less than the nameplate rating is harmful to
the
motor.
SAVE THESE INSTRUCTIONS.
ADDITIONAL SAFETY RULES
1.
Always be sure you have a firm footing.
2.
Hold
the
tool firmly.
3.
Keep hands away from rotating parts.
4.
When driving into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if you drive into a "live" wire.
5.
Do
not touch
the
bit or
the
workpiece immediately after operation: they may
be extremely hot and could burn your skin.
Be sure no one is below when using
the
tool
in
high locations.
SAVE THESE INSTRUCTIONS.
4