Makita 6911DW Impact Driver User Manual


 
Use
only
the driver bit or socket bit shown
in the figure.
Do
not use any other driver bit or socket
bit.
To install the bit, pull the
sleeve
in the
direction
of
the arrow and insert the bit
into the
sleeve
as
far
as
it
will go. Then
release the
sleeve
to secure the bit.
11
mm
(7/16")
9
mm
(3/8")
Sleeve
To remove the bit, pull the sleeve in the direction
of
the arrow and pull the bit out firmly.
NOTE
:
If
the bit
is
not inserted deep enough into the
sleeve,
the
sleeve
will not return to
its
original
position and the bit will not be secured. In this
case,
try re-inserting the bit
according to the instructions above.
7