Filter
Top Products
14.
REMOVE ADJUSTING
KEYS
AND WRENCHES. Form habit of checking
to
see
that keys and adjusting wrenches are removed from tool before turn-
ing it on.
15.
AVOID UNINTENTIONAL STARTING. Don't carry plugged-in
tool
with finger
on switch.
Be
sure switch
is
OFF when plugging in.
16.
OUTDOOR
USE
EXTENSION CORDS. When tool
is
used outdoors, use only
extension cords intended for use outdoors and
so
marked.
17.
STAY ALERT. Watch what you
are
doing, use common sense. Don't oper-
ate tool when you
are
tired.
18.
CHECK DAMAGED PARTS. Before further use of the
tool,
a guard
or
other
part that
is
damaged should be carefully checked to determine that
it
will
operate properly and perform its intended function. Check for alignment
of moving
parts,
binding of moving
parts,
breakage of parts, mounting, and
any other conditions that may affect its operation. A guard
or
other part
that
is
damaged should be properly repaired
or
replaced by an authorized
service
center unless otherwise indicated elsewhere in this instruction manu-
al. Have defective switches replaced by authorized service center. Don't
use tool if switch does not turn it on and
off.
19.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces.
For
example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use only identical replacement
parts.
VOLTAGE WARNING: Before connecting the tool
to
a
power source (receptacle,
outlet, etc.) be sure the voltage supplied
is
the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY to the user
-
as
well
as
damage to
the
tool.
If in doubt, DO NOT PLUG
IN
THE TOOL. Using a power source with
voltage
less
than the nameplate rating
is
harmful to the motor.
3