Filter
Top Products
Switch action
Tool speed
is
increased by increasing pres-
sure on the trigger. To start the tool,
simply pull the trigger.
Release
the trigger
to stop. For continuous operation, pull the
trigger and then push in the lock button.
To stop the tool while in the locked posi-
tion, pull the trigger fully, then release
it.
A speed control screw
is
provided
so
that
tool speed can be maintained
at
a
constant
speed other than
its
maximum speed. Turn
the speed control screw clockwise for
higher speed, and counterclockwise for
lower speed.
Trigger
switch
LO~
11
4
button
CAUTION
:
Before plugging in the tool, always check to
see
that the trigger switch actuates properly
and returns to the "OFF" position when released.
Reversing switch action
This tool has
a
reversing switch to change
the direction
of
rotation. Move the revers-
ing switch lever to the
"FWD"
position for
clockwise rotation or the
"REV"
position
for counterclockwise rotation.
Reversing switch lever
CAUTION
:
Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to
a
complete stop. Changing the
direction
of
rotation before the tool stops may damage the tool.
Speed change
A gear shift mechanism allows tool opera-
tion within
two
versatile speed ranges. For
higher speeds, turn the speed change lever
so
that
its
A
mark
is
aligned with the
"11"
mark on the tool body. For lower speeds,
turn the speed change lever
so
that
its
A
mark
is
aligned with the
"I"
mark on the
tool
body.
Speed change lever
/
6