Filter
Top Products
replaced
by
an authorized service center unless otherwise indicated elsewhere
in
this
instruction manual. Have defective switches replaced
by
authorized service center.
Don't
use
tool
if
switch does
not
turn
it
on
and off.
19.
GUARD AGAINST ELECTRIC SHOCK. Prevent
body
contact with grounded sur-
faces. For example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use
only
identical replacement parts.
SAVE THESE INSTRUCTIONS.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.)
be
sure
the voltage supplied
is
the same
as
that specified on the nameplate of the tool.
A
power source with
voltage greater than that specified
for
the tool can result
in
SERIOUS INJURY to the user
-
as well
as
damage to the tool.
If
in
doubt,
DO
NOT PLUG
IN
THE TOOL. Using a power source with voltage
less
than the nameplate rating
is
harmful to the motor.
How
to
use
Switch action
To
start the tool, simply pull the trigger.
Release
the trigger to stop.
For continuous operation without having
to keep your finger on the trigger, just
pull the trigger and then push in the lock
button with your thumb.
To
stop the tool
from the lock position, simply pull the
trigger again and release
it.
Sanding
tips
Switch on the tool and
let
it
run
at
top
speed before applying to work surface.
Press belt only lightly upon work:
Belt
sander allows pinpoint sanding in close
quarters. Remove side grip
as
in photo
(Fig.
2)
for tight spots.
Fig.
1
~
Fig.
2
3