Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do
not charge Battery Cartridge when temperature is BELOW 10°C
(5OOF)
2.
Do
not attempt to use a step-up transformer, an engine generator
or
DC
3.
Do
not allow anything to cover or clog the charger vents.
4.
Do
not short the battery cartridge.
A
battery short can cause a large current
flow, overheating, possible burns and even a breakdown.
5.
Do
not store the tool and Battery Cartridge in locations where the tempera-
ture may reach or exceed
5OoC
(122OF).
6.
Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
completely worn out. The battery cartridge can explode in
a
fire.
or ABOVE 4OoC
(104OFI.
power receptacle.
ADDITIONAL SAFETY RULES
FOR CORDLESS FINISHING SANDER
1. Be aware that this tool is always in an operating condition, because
it
does
2.
Hold the tool firmly with both hands.
3.
Do
not leave the tool running. Operate the tool only when hand-held.
4.
This tool has not been waterproofed,
so
do not use water on the working
not have to be plugged into an electrical outlet.
surface.
SAVE THESE INSTRUCTIONS.
5