Filter
Top Products
6
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
CAUTION:
• Before plugging in the tool, always check to see that the
tool is switched off.
• Switch can be locked in “ON” position for ease of
operator comfort during extended use. Apply caution
when locking tool in “ON” position and maintain firm
grasp on tool.
To start the tool, slide the slide switch forward. To stop the
tool, slide it backward.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing abrasive paper
To install the abrasive paper, pull back on the lever clip to
open the paper clamp. Insert the paper end between the
base and the paper clamp. Center the paper and align the
edges parallel to the pad, then release the lever clip to
secure the paper. (Prebending paper makes attachment
easier.)
Repeat the same process for the other end of the base,
maintaining the proper paper tension.
1. Slide switch
1
003279
1. Lever clip
2. Paper clamp
3. Abrasive paper
4. Base
12
3
4
003303