Makita 9047L Grinder User Manual


 
Installing wheel guard
When using a depressed center wheel or an
abrasive cut-off wheel, always use a wheel
guard. Mount the wheel guard with the tab
on the wheel guard band aligned with the
notch on the bearing box Then rotate the
wheel guard
160
degrees counterclockwise.
Be sure to tighten the screw securely.
Installing side grip (auxiliary handle)
Always install the side grip on the tool
securely before operation. The side grip can
be installed in any of three positions on the
sides of the tool, whichever is convenient
and keeps the guard properly positioned.
Always hold the tool's switch handle and the
side grip firmly with both hands during
operation.
,-Wheel
guard
WARN
I
NG
:
Side grip only
in
such a way that grinding wheel will not contact any part of your body
and that wheel guard always remains positioned as a barrier between the grinding wheel
and the operator. Failure to do
so
may result
in
serious injury.
6