Filter
Top Products
Installing side grip (auxiliary handle)
5
Installing or removing depressed center
wheel
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the wheel.
Screw the inner flange onto the spindle.
Hold the spindle with the wrench
so
that
it
cannot revolve, then use the lock nut
wrench to secure the inner flange. Fit the
wheel on over the inner flange and screw
the lock nut onto the spindle.
To tighten the lock nut, hold the spindle
with the wrench
so
that
it
cannot revolve,
then use the lock nut wrench and securely
tighten clockwise.
Lock
nut
I
Depressed
center wheel
To remove the wheel, follow the installation procedure in reverse.
5