Makita 9560CV Grinder User Manual


 
ASSEMBLY
Installing and removing wheel cover
Installing
Pull the lever in the direction
of
the arrow after loosening the screw.
Install the wheel cover on the bearing box by adjusting the convex
of
the wheel cover to
Turn the wheel cover
by
180
degrees. Fasten
it
with the screw after pulling the lever the
For the working purpose, the setting angle of the wheel cover can be adjusted with the
Removing wheel cover
Follow the installation procedure
in
reverse to remove the wheel cover
the concave of the bearing box.
direction of the arrow.
lever
Shaft
lock
Press the shaft lock to prevent spindle rota-
tion when installing or removing acces-
sories.
CAUTION:
Never actuate the shaft lock when the
spindle is moving. The tool may be dam-
aged.
Installing side grip (auxiliary handle)
Screw the side grip on the tool securely.
The side grip can be installed on either side
of
the tool, whichever
is
convenient.
Shaft
lock
7