Filter
Top Products
*Never use the tool with other than compressed
air. If bottled gas (carbon dioxide, oxgen, nitro-
gen, hydrogen, air, etc.) or combustible gas
(hydrogen, propane, acetylene, etc.) is used as
a power source for this tool, the tool will explode
and cause serious injury.
*Always check the tool for its overall condition
and loose screws before operation. Tighten as
required.
Make sure
all
safety systems are
in
working order
before operation. The tool must not operate if
only the trigger is pulled or if only the contact arm
is pressed against the wood. It must work only
when both actions are performed. Test for pos-
sible faulty operation with nails unloaded and the
pusher in fully pulled position.
COMPRESSED
AIR
c