Filter
Top Products
13
Installing or removing socket
To install the socket, push it onto the square drive of the tool
with one hand by depressing a pin on the square drive with
another hand until it locks into place. To remove the socket,
simply pull it off depressing the pin on the square drive.
OPERATION
Hold the tool firmly and place the socket over the bolt or nut.
Then switch the tool on. When the clutch cuts in, the motor
will stop automatically. Then release the switch trigger.
NOTE:
• Hold the tool with its square drive pointed straight at the
bolt or nut, or the bolt or nut will be damaged.
Limits of fastening capacity
Use the tool within the limits of fastening capacity. If you use
the tool beyond the limits, the clutch does not work. And the
tool cannot deliver enough fastening torque.
1. Socket
2. Hole
3. Pin
1
2
3
003623
Range of fastening capacity
Torque
Revolution angle( )
N.m
360
300
240
180
120
60
0
2345678
BFL080F
003624
BFL081F
Range of fastening capacity
Revolution angle ( )
Torque
N.m
005026