Filter
Top Products
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BHR240
Concrete 18 mm
Steel 13 mm
Capacities
Wood 26 mm
No load speed (min
-1
) 0 - 1,100
Blows per minute 0 - 4,000
Overall length 410 mm
Net weight 3.2 kg
Rated voltage D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END004-3
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE043-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 88 dB(A)
Sound power level (L
WA
) : 99 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG215-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : chiseling function
Vibration emission (a
h,CHeq
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG303-2
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 14.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG301-1
Work mode : drilling into metal
Vibration emission (a
h,D
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-13
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Rotary Hamme
r
Model No./ Type: BHR240
are of series production and