Filter
Top Products
2
ENGLISH
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
GENERAL SAFETY RULES
GEA002-3
WARNING:
Read all instructions. Failure to follow all
instructions listed below may result in elec-
tric shock, fire and/or serious injury. The
term “power tool” in all of the warnings listed
below refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
Model BTP130 BTP140
Impact driver mode
Max. fastening torque 135 N•m (100 ft.lbs) 145 N•m (107 ft.lbs)
Capacities
Machine screw 4 mm - 8 mm (5/32” - 5/16”)
Standard bolt 5 mm - 14 mm (3/16” - 9/16”)
High tensile bolt 5 mm - 12 mm (3/16” - 1/2”)
No load speed (RPM) 0 - 2,400/min. 0 - 2,300/min.
Impacts per minute 0 - 3,200
Hammer drill mode
No load speed (RPM) 0 - 2,400/min. 0 - 2,300/min.
Blows per minute 0 - 28,800/min. 0 - 27,600/min.
Capacities Concrete 8 mm (5/16”)
Drill mode
No load speed (RPM)
High (2) 0 -2,400 0 -2,300
Low (1) 0 - 700/min.
Capacities
Steel 10 mm (3/8”)
Wood 21 mm (13/16”)
Screw driver mode
No load speed (RPM) 0 - 2,400/min. 0 - 2,300/min.
Capacities Machine screw M4
Overall length 186 mm (7-3/8”)
Net weight 1.7 kg ( 3.7 lbs) 1.8 kg ( 4.0 lbs)
Rated voltage D.C.14.4 V D.C.18 V
Standard battery cartridge BL1430 BL1830