Filter
Top Products
P 3/ 11
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Rack Complete
[3] -2. Motor Complete, Gear Assembly
DISASSEMBLING
ASSEMBLING
Disassemble Rack complete as drawn in Fig. 2.
(1) Disassemble the drive section (Gear assembly, Motor complete) as drawn in Fig. 3.
Assemble by reversing the disassembly procedure. (Refer to Fig. 2)
Fig. 2
Fig. 3
M3x18 Pan head screw
3. Pull out Rack complete.
Holder A or B complete Piston A, B or C complete Rack 42 or 64 complete
1. Disassemble Holder complete
by turning counterclockwise.
2. Disassemble Piston complete by
unscrewing M3x18 Pan head screw.
Plate
Housing (R)
complete
Housing (L) complete
M5x16
Pan head
screw (4 pcs.)
2. Loosen 9 pcs. of 3x16 Tapping screw, and
remove Housing (R) complete.
6. Separate drive section (Motor complete and
Gear assembly) from Housing (L) complete.
And disconnect receptacles from DC motor.
Holder joint A or B complete
Motor
complete
Compression
spring 6
Gear assembly
Receptacles
1. Loosen M5x16 Pan head screws, and remove Plate
and Holder joint.
Note: Hold Compression spring 6 with your finger,
or it will come off.