Filter
Top Products
2
ENGLISH
SPECIFICATIONS
Model DF030D
Steel 10 mm
Wood 21 mm
Wood screw 5.1 mm x 63 mm
Capacities
Machine screw M6
High (2) 0 - 1,300
No load speed (min
-1
)
Low (1) 0 - 350
Chuck capcity 6.35 mm
Overall length 157 mm
Net weight 0.88 kg
Rated voltage D.C. 10.8 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END004-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE034-1
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
ENG103-1
Noise
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
pA
) : 70 dB(A) or less
The noise level under working may exceed 85 dB(A)
Wear ear protection
ENG202-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
ENH102-7
EC-DECLARATION OF CONFORMITY
Model; DF030D
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014 in accordance with Council
Directives, 2004/108/EC, 98/37/EC.
CE2007
000230
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.