Filter
Top Products
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA Power Cut cutoff saw!
We are confident that you will be satisfied with this modern piece
of equipment
.
Like our chain saws. the MAKITA Power Cuts
feature specially designed high-performance engines with out-
standing power-to-weight ratios. for heavy-duty yet lightweight
tools
.
Other advantages of the MAKITA Power Cuts:
Sturdyconstruction and high reliability
.
Maintenance-free electronic ignition. hermetically sealed to
protect against dust and moisture
.
Vibration damping with the 2-mass system
(D2M)
for tireless
working even when guiding the Power Cut by hand
.
Three-stage air-filter system for reliable operation even in very
dusty conditions
.
Two options for mounting the cutter attachment: Either cen-
trally. for good balance when guiding the unit manually. or on
the side. for flush cuts along walls or curbsides or horizontally
directly above the ground
.
Extensive line of synthetic-resin and diamond cutting discs.
and trolley with vibration damping. dust catcher. and several
systems for water supply
to
the cutting disc
.
We want you
to
be satisfied with your MAKITA product
.
In order
to
guarantee the optimal function and performance of
your Power Cut and
to
ensure your personal safety we would
request you
to
perform the following:
Read this owner’s manual carefully before putting the
Power Cut into operation for the first time. and strictly
observe the safety regulations
.
Table of contents
Page
Packing
.............................................
Delivery inventory
............................
Symbols
...............................................................................
3
SAFETY PRECAUTIONS
.....................................................
4
General precautions
........................................................
4
Protective equipment
...................................................
4-5
Fuels/ Refuelling
.............................................................
5
Putting into operation
.......................................................
5
Cutting discs
....................................................................
6
Kickbackand lock-in
Cutting metal
...................................................................
8
Cutting masonry
...........................................................
8.9
Transport and storage
.....................................................
9
Working behavior/ Method of working
....
Technical data
...................................................................
11
Denomination of components
.........................................
11
PUTTING INTO OPERATION
............................................
12
Installing the drive arm
Tightening the V.belt
......................................................
13
Mounting thecutting disc
.........................................
13-14
Fuels
/
Refuelling
.....................................................
14-15
Starting the engine
.........................................................
15
Cold-starting 15
Warm-starting
................................................................
15
If the engine won’t start
..................................................
15
Stopping the engine
.......................................................
15
Adjusting the carburetor ..................................................
16
MAINTENANCE
..................................................................
17
Changing the V-belt
.......................................................
17
Cleaning the protection hood
.........................................
17
Cleaning /changing the air filter
....................................
18
Replacing the spark plug
...............................................
18
Replacing the suction head
...........................................
19
Replacing the starter cable
Replacing the return spring
Instructions for periodic maintenance
............................
23
Cutting attachment in central
/
side position .................
20
Repositioning the cutting attachment
20-21
Repositioning the cutting
and mounting the cutting disc
.
12-13
(DPC
7000,
DPC 7001)
.
(DPC 9500, DPC
9501)
.................................................
21
and pressure water system
............................................
22
SPECIAL ACCESSORIES ..................................................
22
Diamond cutting discs, trolley. water tank
Service, spare parts and guarantee ..........................
23-24
Trouble shooting
.
24
Extract from spar
............................................
25
Accessories
...................................................................
25
Service centers in the USA
....................................
50
Notes
............................
51
Packing
Your MAKITA Power Cut is packed in acardboard box
to
prevent
shipping damage
.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling)
.
2