Filter
Top Products
P 5/ 14
Repair
ASSEMBLING
(2) Assemble the drive end of Armature as drawn in Fig. 5.
Fig. 5
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Armature, Spiral bevel gear [small one] (cont.)
2. Mount Gear housing cover to
Armature to fit the groove of
the cover to Compression
spring 33 and Armature shaft
through Ball bearing 6001LLB.
1. Set Brake shoe holder
complete and Compression
spring 33 to Armature.
3. Supporting Armature section
with 2 pcs. of 1R258, press
Gear housing cover to
Armature section with 1R028.
1R258
1R028
Compression
spring 33
Brake shoe
holder complete
Groove of Gear
housing cover
Compression
spring 33
Ball bearing
6001LLB
Armature
4. Set Spiral bevel gear (small) and Flat washer 6 to Armature shaft.
Then, secure them with M6 Hex nut.
Flat washer 6
Spiral bevel
gear (small)
M6 Hex nut
Wrench 10