Filter
Top Products
7
OPERATION
Turn the tool on without the wheel point making any contact
with the workpiece and wait until the wheel point attains full
speed. Then apply the wheel point to the workpiece gently.
To obtain a good finish, move the tool in the leftward direc-
tion slowly.
CAUTION:
• Apply light pressure on the tool. Excessive pressure on
the tool will only cause a poor finish and overloading of
the motor.
Dressing wheel point
When the wheel point becomes “loaded” with various bits
and particles, you should dress the wheel point with the
dressing stone.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other mainte-
nance or adjustment should be performed by Makita Autho-
rized or Factory Service Centers, always using Makita
replacement parts.
003855
1. Dressing stone
1
003856